Updated Nov 20, 2026· 9 min read

Our Top Picks

  1. Best Circular Saws for Framing
    Best Circular Saws for Framing
    Check on Amazon
  2. SKIL 15 Amp 7-1/4 Inch Circular Saw with
    SKIL 15 Amp 7-1/4 Inch Circular Saw with7-1/4 Inch (Pack of 1)14.2 x 9.8 x 8.5 inches8.7 pounds
    Check on Amazon

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

Best Circular Saws for Framing, Decks and Home Shops
⭐ Key Takeaways
Quick answer: Our top pick is DEWALT DCS570B 20V MAX Circular Saw, with SKIL 5280-01 15 Amp Circular Saw as a strong alternative.

A circular saw is the workhorse of most wood shops and job sites. It breaks down sheet goods, crosscuts framing lumber, rips deck boards to width, and handles bevel cuts for stairs and trim. The right saw depends on how you work: corded saws deliver steady power for long sessions near an outlet, while cordless saws free you from the cord when you are cutting on a deck frame or far from power. A 7-1/4 inch blade is the standard for framing because it cuts through a standard two-by board in a single pass at 90 degrees. This guide compares five widely available saws across the specs that change how a cut feels: motor power, no-load speed, depth of cut, bevel range, weight, and what comes in the box.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most buyers, a corded 15-amp saw with a 7-1/4 inch blade is the safest first choice, and the DEWALT DWE575 covers framing and sheet goods with a wide bevel range and a light body. The SKIL 5280-01 suits tighter budgets, the Makita 5007MG suits heavy daily use, the Bosch CS10 suits accuracy-focused buyers, and the DEWALT DCS570B suits 20V MAX owners who want cordless freedom.

DEWALT DCS570B 20V MAX Circular Saw

DEWALT DCS570B 20V MAX Circular Saw

DEWALT DCS570B 20V MAX Circular Saw

Check price on Amazon

The DCS570B is the cordless pick in this roundup, and it suits buyers who already own DEWALT 20V MAX batteries. Its brushless motor spins a 7-1/4 inch blade at 5,500 RPM, which is fast enough for framing lumber and sheet goods without the drag of a cord. An electric brake stops the blade quickly after the trigger is released. The bevel capacity runs to 57 degrees with positive stops at 22.5 and 45 degrees, so angled cuts for stairs and trim are covered. Depth of cut reaches 2-9/16 inches at 90 degrees and 2 inches at 45 degrees, which handles standard two-by stock in one pass. The saw is sold as a bare tool, so the battery and charger are separate purchases unless you already own them.

Specs

  • Power source: cordless, 20V MAX battery platform
  • Motor: brushless
  • Blade size: 7-1/4 inches
  • No-load speed: 5,500 RPM
  • Depth of cut: 2-9/16 inches at 90 degrees, 2 inches at 45 degrees
  • Bevel capacity: 57 degrees with stops at 22.5 and 45 degrees
  • Brake: electric blade brake
  • Included: blade and blade wrench; battery and charger sold separately
  • Weight: 7.5 pounds as a bare tool

  • ASIN: B06ZZY8KDL

SKIL 5280-01 15 Amp Circular Saw

SKIL 5280-01 15 Amp Circular Saw

SKIL 5280-01 15 Amp Circular Saw

Check price on Amazon

The SKIL 5280-01 is the budget pick, and it earns that spot with a full-size feature list at a lower tier than the other corded saws here. A 15-amp motor drives a 7-1/4 inch carbide-tipped blade at 5,300 RPM, and the depth of cut reaches 2-7/16 inches at 90 degrees. A single beam laser guide projects a line ahead of the blade, which helps newer users hold a straight cut without a separate guide. A built-in dust blower clears sawdust from the cut line, and the bevel capacity runs to 51 degrees with a positive stop at 45 degrees. The saw weighs 8.7 pounds and comes with a 24-tooth carbide-tipped blade, a blade wrench, and a carrying bag. There is no electric brake, so the blade coasts to a stop after the trigger is released.

Specs

  • Power source: corded electric, 15 amp
  • Motor: 15-amp direct drive
  • Blade size: 7-1/4 inches, 24-tooth carbide-tipped blade included
  • No-load speed: 5,300 RPM
  • Depth of cut: 2-7/16 inches at 90 degrees, 1-15/16 inches at 45 degrees
  • Bevel capacity: 51 degrees with a positive stop at 45 degrees
  • Guides: single beam laser guide and dust blower
  • Cord: 6-foot power cord
  • Weight: 8.7 pounds

  • ASIN: B01BD81BLO

Makita 5007MG Magnesium Circular Saw

Makita 5007MG Magnesium Circular Saw

Makita 5007MG Magnesium Circular Saw

Check price on Amazon

The Makita 5007MG is the heavy-duty corded pick, built around magnesium components that keep a full-size saw rigid without excess bulk. Its 15-amp motor runs at 5,800 RPM, the fastest no-load speed in this roundup, which suits long ripping sessions and dense framing lumber. Two built-in LED lights illuminate the line of cut, and a dust blower keeps the mark visible. Depth of cut reaches 2-1/2 inches at 90 degrees, and the bevel capacity runs from 0 to 56 degrees with positive stops at 22.5 and 45 degrees. The saw weighs 10.6 pounds, so it is heavier than the DEWALT and SKIL corded saws, and that weight is the main trade-off against its speed and build. A premium 7-1/4 inch carbide-tipped framing blade is included, along with a blade wrench.

Specs

  • Power source: corded electric, 15 amp
  • Motor: 15-amp Makita-built motor
  • Blade size: 7-1/4 inches, premium carbide-tipped framing blade included
  • No-load speed: 5,800 RPM
  • Depth of cut: 2-1/2 inches at 90 degrees
  • Bevel capacity: 0 to 56 degrees with positive stops at 22.5 and 45 degrees
  • Features: magnesium components, two LED lights, dust blower
  • Weight: 10.6 pounds
  • Warranty: one-year limited warranty

  • ASIN: B000N5SVEY

DEWALT DWE575 Lightweight Circular Saw

DEWALT DWE575 Lightweight Circular Saw

DEWALT DWE575 Lightweight Circular Saw

Check price on Amazon

The DEWALT DWE575 is the lightest full-size corded saw in this roundup at 8.8 pounds, and that weight difference shows up on long days of repeated cuts. A 15-amp motor spins a 7-1/4 inch blade at 5,200 RPM, with a depth of cut of 2-9/16 inches at 90 degrees, the deepest in this group. The bevel capacity runs to 57 degrees with stops at 45 and 22.5 degrees. An anti-snag ball-bearing lower guard and a high-grade aluminum base and shoe hold up to jobsite wear. The saw ships with a carbide-tipped 7-1/4 inch blade, a blade wrench, and an instruction manual. Unlike the DWE575SB variant, this model has no electric brake, so the blade coasts after the trigger is released.

Specs

  • Power source: corded electric, 15 amp
  • Motor: 15-amp motor
  • Blade size: 7-1/4 inches, carbide-tipped blade included
  • No-load speed: 5,200 RPM
  • Depth of cut: 2-9/16 inches at 90 degrees
  • Bevel capacity: 57 degrees with stops at 45 and 22.5 degrees
  • Base: high-grade aluminum base and shoe
  • Guard: anti-snag ball-bearing lower guard
  • Weight: 8.8 pounds

  • ASIN: B007QUZ106

Bosch CS10 7-1/4 Inch Circular Saw

Bosch CS10 7-1/4 Inch Circular Saw

Bosch CS10 7-1/4 Inch Circular Saw

Check price on Amazon

The Bosch CS10 rounds out the corded group with a 15-amp motor, a 5,600 RPM no-load speed, and a die-cast magnesium footplate that stays flat and resists bending. Depth of cut reaches 2-7/16 inches at 90 degrees, and the bevel capacity runs to 56 degrees with stops at 22.5, 45, and 56 degrees. Bevel louvers direct blower output to clear dust from the cut line, and an anti-snag lower guard smooths operation on small cut-off pieces. A saw hook and a 10-foot cord add storage and reach between cuts. The saw weighs 10.2 pounds and carries a one-year limited warranty.

Specs

  • Power source: corded electric, 15 amp
  • Motor: 15-amp high-output motor
  • Blade size: 7-1/4 inches
  • No-load speed: 5,600 RPM
  • Depth of cut: 2-7/16 inches at 90 degrees
  • Bevel capacity: 56 degrees with stops at 22.5, 45, and 56 degrees
  • Footplate: die-cast magnesium footplate
  • Cord: 10-foot cord
  • Weight: 10.2 pounds
  • Warranty: one-year limited warranty

  • ASIN: B0001X21PS

How to choose

Start with power source. Corded saws suit shop work and long cutting sessions because they never run out of charge, and every corded saw here runs a 15-amp motor. Cordless saws suit decks, framing on open sites, and any job far from an outlet, but you must already own compatible batteries or budget for them. Next, check blade size and depth of cut. A 7-1/4 inch blade with at least 2-7/16 inches of depth at 90 degrees cuts standard two-by lumber in one pass. Bevel range matters for stairs, trim, and angled framing; 56 to 57 degrees covers most angled work, while a 51-degree bevel is fine for common 45-degree cuts. Weight is the next filter: lighter saws cause less fatigue on long sessions, while heavier saws often carry larger motors and sturdier bases. Finally, look at the extras that match your habits: an electric brake for fast repeated cuts, a laser guide or LED lights for line visibility, and a long cord for reach across a garage or shop.

Who should skip

Skip a full-size 7-1/4 inch circular saw if your work is mostly small trim, thin plywood, or delicate craft cuts. A compact 6-1/2 inch or 4-1/2 inch saw is lighter, easier to control on thin stock, and less likely to overpower a small cut. Skip the cordless DCS570B if you own no DEWALT 20V MAX batteries, since the bare tool needs a battery and charger before it cuts anything. Skip the heavier corded saws, the Makita 5007MG and Bosch CS10, if you work overhead or carry a saw up ladders all day; the lighter DEWALT DWE575 or the SKIL 5280-01 will cause less fatigue. Skip the budget SKIL 5280-01 if you need an electric brake or plan to cut dense hardwoods for hours at a time. Anyone cutting metal, masonry, or concrete needs a different blade and often a different saw type, so check the blade rating before cutting anything other than wood and wood composites.

FAQ

What size circular saw is best for framing?

A 7-1/4 inch saw is the standard for framing because it cuts through standard two-by lumber in a single pass at 90 degrees. All five saws in this guide use a 7-1/4 inch blade, with depths of cut from 2-7/16 to 2-9/16 inches at 90 degrees.

Corded or cordless: which circular saw should I buy?

Corded saws suit shop work and long sessions because they deliver steady power with no battery to charge, and they cost less than a comparable cordless kit. Cordless saws suit outdoor framing, deck builds, and sites without easy outlet access. If you already own batteries on one platform, a bare-tool cordless saw is the practical choice.

Do I need an electric brake on a circular saw?

An electric brake stops the blade quickly after you release the trigger, which helps when you make many repeated cuts and set the saw down often. Saws without a brake, such as the SKIL 5280-01 and DEWALT DWE575, simply coast to a stop, so you wait a moment before setting the saw down.

What does bevel capacity mean on a circular saw?

Bevel capacity is the maximum angle the blade can tilt from vertical, which sets how steep an angled cut you can make. A 56- or 57-degree bevel covers steep stair and trim angles, while a 51-degree bevel still handles the common 45-degree miter cut. Positive stops at 22.5 and 45 degrees return you to common angles quickly.

Final verdict

For most buyers, the DEWALT DWE575 is the best all-round choice: it is the lightest full-size corded saw here, it cuts the deepest at 90 degrees, and its wide bevel range covers framing and angled work alike. Buyers on a tighter budget should pick the SKIL 5280-01, which covers the same core jobs with a laser guide and dust blower at the budget tier. The Makita 5007MG suits heavy daily use with its fast 5,800 RPM motor and magnesium build, while the Bosch CS10 suits buyers who want a flat magnesium footplate and a clear sightline for accurate cuts. The DEWALT DCS570B is the pick for cordless work, but only for buyers who already own 20V MAX batteries.

R
RP Woodworks Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Circular Saws for Framing, Decks and Home…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.