What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Searching for a delta band saw usually means you have hit the limits of your jigsaw or circular saw on curved cuts and thick stock. The real problem is not finding a machine with a round wheel on each side — dozens look similar in product photos. The actual problem is finding one that tracks a blade straight under load, delivers enough power for the depth you need, and does not vibrate itself apart after a few hundred cuts.
This roundup covers eight machines and accessories that owners consistently recommend within the benchtop and portable band saw category in 2026. We compared published specs, current prices, and owner feedback to identify which models earn their place on your shop floor and which ones leave you frustrated after the first weekend project. The gap between a good pick and a poor one comes down to motor thermal capacity, blade tracking precision, table flatness, and fence rigidity — not brand names alone.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Product prices and availability are accurate as of the date shown and are subject to change.
Quick Picks
| Product | Best for | Price |
|---|---|---|
| WEN BA3959 | Tightest budget benchtop cuts | $143.66 |
| DeWalt 1700 & 2500 SPM | Versatile two-speed woodworking | $249 |
| DEWALT DCS374B | Portability and deep-cuts in tight spaces | $289 |
| Ryobi BS904G | Beginner with a starter tool collection | $208 |
| KFMK Tabletop Band Saw | Metal and dense hardwood cutting | $299.98 |
| Urethane Band Saw Tires | Restoring a worn delta band saw blade wheel | $14.86 |
| WEN BA3962 | Taller resaw capacity with floor stand | $391.26 |
| QD-KYOHO 9-Inch | Precision table work with miter gauge included | $229.99 |
How We Picked
We evaluated each product against four criteria that separate reliable band saws from mediocre ones. First, motor power relative to cutting depth — a saw that stalls at three-quarter inch is not worth owning even if it is cheap. Second, blade tracking system quality: sealed bearings, adjustable guides, and wheel crowning determine whether your cuts stay straight or wander. Third, table and fence construction — cast-aluminum or machined-steel tables with positive-lock fences outperform stamped-steel equivalents under repeated use. Fourth, owner-reported durability over months of regular cutting, particularly around plastic bearings and belt drive systems.
The 8 Best Delta Band Saw in 2026
WEN 9-Inch Band Saw (BA3959)
The WEN BA3959 fills the role of an entry-level benchtop band saw for hobbyists who need occasional curve cuts and thin stock resawing without committing significant money. Its 2.8-amp motor handles up to about two and a half inches of cutting depth, which is adequate for most woodwork up to hardwoods under two inches thick.
- Pro: Lowest price in this roundup by a wide margin, making it a low-risk way to learn band saw fundamentals.
- Pro: Compact footprint fits on a small workbench without dominating the space.
- Con: Owners report the stock blade tracker needs upgrading with aftermarket urethane tires for consistent tracking.
Skip this if you plan to resaw thick stock regularly or need a fence system with real precision. The motor lacks the thermal headroom for extended cutting sessions.
DeWalt 9-Inch Band Saw (Two-Speed)
DeWalt’s benchtop band saw steps up significantly with a 3.5-amp motor and two-speed operation at 1700 and 2500 SPM, giving you the flexibility to dial in blade speed for harder woods or softer materials. The integrated LED worklight illuminates the blade line without occupying table space.
- Pro: Two-speed selection lets you match blade velocity to material density for cleaner cuts.
- Pro: Integrated LED worklight is genuinely useful in dim shop corners without an auxiliary lamp.
- Con: No included stand means it sits on your bench, taking up workspace you might want for layout.
Skip this if you already own a DeWalt 20V MAX tool and want cordless mobility instead. The corded design limits where you can use it in your shop.
DEWALT 20V MAX Band Saw (DCS374B)
The DCS374B is a portable band saw designed for deep cuts on the go, whether you are trimming branches, cutting conduit, or notching lumber that will not fit on a benchtop saw. Its five-inch cutting capacity and integrated hang hooks make it practical for jobs where a stationary saw cannot reach the workpiece.
- Pro: Cordless design with 20V MAX platform compatibility means it shares batteries with your other DEWALT tools.
- Pro: Hang hooks and compact body let you store it in tight spots or carry it to job sites easily.
- Con: Bare tool only — if you do not own the 20V MAX battery and charger, add $70-$120 to the effective cost.
Skip this if your primary use case is resawing boards or precise curved cuts on a workpiece that fits on a table. A stationary band saw will outperform it for those tasks.
Ryobi BS904G
The Ryobi BS904G targets the same beginner audience as the WEN BA3959 but brings Ryobi’s ecosystem reputation and a slightly different feature set. Owners appreciate its straightforward setup and adequate power for the price point, though it occupies a middle ground between the cheapest options and the premium two-speed models above it.
- Pro: Ryobi’s extensive accessory ecosystem means replacement blades, tires, and jigs are easy to source.
- Pro: Green color coding helps identify it quickly among a cluttered set of benchtop tools.
- Con: Lacks a two-speed motor, limiting its range on denser hardwoods where slower blade speeds help prevent burning.
Skip this if you want a saw you can eventually resaw with — the throat depth and motor capacity favor smaller projects and learning exercises.
KFMK Tabletop Band Saw
The KFMK brings a 10-amp motor and a variable speed range of 137-472 FPM, which puts it firmly in the metal-cutting category alongside woodworking tasks. This wide speed range with very low minimum speeds makes it viable for aluminum, mild steel, and dense tropical hardwoods that would stall a typical woodworking band saw.
- Pro: 10-amp motor with low-speed range handles materials that would defeat any other saw in this list.
- Pro: Five-inch cutting capacity supports deeper resawing than the nine-inch benchtop models.
- Con: Owners note the table surface finish and fence tolerances trail dedicated metal-cutting brands, requiring some attention during setup.
Skip this if your shop is exclusively woodworking — you are paying for motor capacity and speed range you will never use.
Urethane Band Saw Tires
These are not a band saw, but they are the single most impactful upgrade for anyone searching “delta band saw” who already owns a Delta 28-150, BS100, SM400, or compatible Craftsman, Grizzly, or Ryobi model. Replacing worn factory tires with new urethane tires restores blade tracking accuracy that degraded over years of use, making your existing saw cut like new.
- Pro: Restores proper blade tracking to delta band saw models with original equipment tires that have compressed or cracked.
- Pro: Two-pack at this price is a negligible investment compared to buying a new saw.
- Con: Requires removing the wheel from the saw frame for installation, which can be tight on certain older models.
Skip this if your saw already has new tires or if you own a model outside the listed compatibility range.
WEN Band Saw with Stand (BA3962)
WEN’s ten-inch model with an included stand addresses the two biggest complaints about the BA3959: insufficient throat depth and no dedicated floor footprint. The 3.5-amp motor and two-speed operation match the DeWalt above, while the ten-inch wheel diameter provides more resaw clearance than the nine-inch machines.
- Pro: Included stand eliminates the need for a separate purchase or workbench clearance.
- Pro: Ten-inch wheels give noticeably more resaw height than the nine-inch models in this group.
- Con: The stand, while functional, is a bolted tubular frame that owners note flexes under heavy lateral pressure during aggressive cuts.
Skip this if you have adequate bench space and want to save money — the BA3959 at less than half the price covers most hobbyist needs.
QD-KYOHO 9-Inch Band Saw
The QD-KYOHO differentiates itself with a cast-aluminum worktable that includes a built-in scale and a miter gauge in the box. For woodworking tasks that demand accurate angle cuts and repeatable positioning, these features matter more than raw horsepower. The 2526 FPM blade speed and 2.5-amp motor are adequate for hardwoods up to moderate thickness.
- Pro: Cast-aluminum table with integrated scale provides better flatness and repeatability than stamped-steel equivalents.
- Pro: Miter gauge included saves you a separate purchase for angled cuts.
- Con: Brand recognition is minimal, meaning replacement parts and community troubleshooting resources are scarcer than for WEN or DeWalt.
Skip this if you value a large owner community for troubleshooting guides and after-market blade availability — stick with an established brand.
Buying Guide
Throat Depth and Resaw Capacity
Throat depth — the distance from blade to column — determines the widest board you can curve. Resaw capacity — the distance from table to upper blade guide — sets your maximum resaw thickness. Most nine-inch benchtop band saws offer two to two and a half inches of resaw, which handles common hardwoods for cutting boards and veneers. If you plan to resaw eight-quarter rough stock, look at the ten-inch WEN BA3962 or consider the KFMK’s five-inch cutting capacity.
Motor Power and Thermal Load
Amperage alone does not tell the whole story. A 2.8-amp motor cutting a knot in oak draws significantly more current than cutting clear pine. The difference between adequate and inadequate shows up after fifteen minutes of continuous cutting: undersized motors slow, burn the wood, and eventually trip a thermal protector. Two-speed machines give you the option to run slower for denser material, reducing the stall risk even with a smaller motor.
Blade Tracking and Guide Quality
Precision in a band saw is determined almost entirely by blade tracking and guide assembly, not motor power. Sealed ceramic bearings last longer than plastic, micro-adjust knobs outperform finger-screws for repeatable setup, and proper wheel crowning keeps the blade centered under load. If you already own a delta band saw with worn tires or guides, replacing those components — as the urethane tires above accomplish — often improves cut quality more than buying a different saw.
Our Verdict
The DeWalt 9-Inch Band Saw is our top pick for most buyers. Two-speed operation, a capable motor, and the integrated LED worklight solve the real problems people encounter within the first month of band saw ownership: cutting hard wood cleanly and seeing the blade line in dim shops.
For the tightest budget, the WEN BA3959 at $143.66 delivers legitimate benchtop band saw functionality without the premium. Pair it with a set of urethane tires to resolve the most common owner complaint about blade tracking.
If your work involves metal, dense tropical hardwoods, or stock thicker than two inches, the KFMK with its 10-amp motor and sub-200 FPM low-speed range wins over every other option in this group.
FAQ
Can I use a delta band saw blade on any of these saws?
Blade compatibility depends on wheel diameter and blade width your saw accepts, not brand names. A 9-inch blade fits any saw with 9-inch wheels and an arbor sized for the blade width. Check the owner’s manual or spec sheet for maximum blade width before ordering replacement blades.
How often should I replace band saw tires?
Urethane tires typically last several years of regular use before compression or cracking degrades tracking. If your blade consistently drifts off-center despite proper guide adjustment, inspect the tires for flat spots or splits. The urethane tire set listed above covers common sizes for delta band saw models and compatible machines.
Is two-speed operation worth it over a single-speed saw?
Yes, if you cut varied materials. Slower blade speeds reduce heat buildup in hardwoods and prevent tearing in softwoods and laminates. A single-speed saw forces a compromise. If you cut only pine or basswood for crafts, the added cost of two-speed may not matter for your use case.
What size band saw do I need for cutting boards?
Cutting boards from rough-sawn hardwood typically requires at least two inches of resaw capacity and a three-inch throat depth for the curves. A nine-inch benchtop band saw meets both requirements for most common board widths. Taller resaws benefit from the ten-inch WEN BA3962 or a full-size floor model.
0 Comments