Updated Nov 20, 2026· 9 min read

Key takeaways

  • Five benchtop drill presses compared for wood, metal, and plastic, with swing, speed, chuck, and table details to help you choose the right machine.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

Best Drill Presses for Woodworking and Small Shops
⭐ Key Takeaways
Quick answer: Our top pick is WEN 4208T 8-Inch 5-Speed Benchtop Drill Press, with WEN 4212T 10-Inch Variable Speed Benchtop Drill Press as a strong alternative.

A drill press holds the bit straight, holds the workpiece steady, and repeats the same hole again and again. A handheld drill can wander, especially in hardwood, and leave a hole that is not square to the face of the board. A benchtop drill press is useful for dowel joints, mortises, shelf pin holes, hinge cups, and clean holes in metal and plastic.

The five machines in this guide are all benchtop models. They fit on a workbench, run on standard household current, and range from a compact eight inch press to a twelve inch press for larger panels. Each one is described from its published specifications.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most small shops, the WEN 4212T is the best balance of size, variable speed, and laser guidance. Choose the WEN 4208T for small parts and a tight bench, the SKIL DP9505-00 for five clear speeds and a three year limited warranty, the WEN DP1062V for stronger variable speed power, and the WEN 4214 for the widest swing here.

How to choose

Start with swing, which is twice the distance from the column to the center of the chuck. An eight inch swing drills to the center of an eight inch wide workpiece, while a twelve inch swing reaches the center of a twelve inch wide workpiece. For cabinet work, ten or twelve inches gives more room. For small boxes, eight inches is often enough.

Next, look at speed control. Wood usually drills well at higher speeds, while metal and large Forstner bits need slower speeds. A five speed press changes speed by moving a belt between pulleys. A variable speed press changes speed with a lever while the motor runs. Either system works well if the range covers slow speeds for steel and faster speeds for softwood.

Spindle travel sets how deep a hole can be drilled in one pass without raising the table. Two inches suits most dowel and hinge work, while three inches or more helps with thick legs and deep mortises. Chuck size sets the largest bit shank the press can hold. A one half inch chuck covers most woodworking bits, while a five eighths inch chuck adds room for larger bits. A cast iron table resists flex, a beveling table allows angled holes, and a laser guide, work light, and depth stop make setup faster.

WEN 4208T 8-Inch 5-Speed Benchtop Drill Press

WEN 10-Inch Benchtop Drill Press, 6.2-Amp Variable Speed Motor with Cast Iron Construction, and Laser (DP1062V

WEN 10-Inch Benchtop Drill Press, 6.2-Amp Variable Speed Motor with Cast Iron Construction, and Laser (DP1062V

Check price on Amazon

The WEN 4208T is the compact pick in this guide, and it suits a small bench, a shared garage, or a first drill press. Its eight inch swing and two inch spindle travel cover small boxes, drawer parts, craft work, and light metal drilling, while its five speeds run from 740 to 3140 RPM. The 2.3 amp motor is rated at one third horsepower, and the one half inch keyed chuck accepts the common range of twist bits and brad point bits. The beveling worktable swivels through a full circle.

Specs

  • Swing: 8 inches
  • Motor: 2.3 amps, one third horsepower induction motor
  • Speeds: 5 speeds, 740 to 3140 RPM
  • Spindle travel: 2 inches
  • Chuck: one half inch keyed chuck with onboard key storage
  • Table: 6.5 by 6.5 inches, bevels up to 45 degrees, swivels 360 degrees
  • Weight: 34.2 pounds
  • Warranty: two year limited warranty
  • ASIN:

WEN 4212T 10-Inch Variable Speed Benchtop Drill Press

WEN 4212T 5-Amp 10-Inch Variable Speed Cast Iron Benchtop Drill Press with Laser

WEN 4212T 5-Amp 10-Inch Variable Speed Cast Iron Benchtop Drill Press with Laser

Check price on Amazon

The WEN 4212T is the best all round pick for most small shops, because it pairs a ten inch swing with variable speed control and a laser guide. The five amp induction motor runs from 530 to 3100 RPM without a belt change, and a digital readout shows the selected speed. That makes it easy to slow down for a large Forstner bit in hardwood or for steel, then speed up again for a small twist bit in softwood. Spindle travel is two and three eighths inches, a useful step up from the compact eight inch press. The one half inch keyed chuck covers the common range of woodworking bits, and the cast iron table has rack and pinion height adjustment and a bevel of up to forty five degrees.

Specs

  • Swing: 10 inches
  • Motor: 5 amps, 600 watts induction motor
  • Speeds: variable speed, 530 to 3100 RPM, with digital readout
  • Spindle travel: 2-3/8 inches
  • Chuck: one half inch keyed chuck with onboard key storage
  • Table: 8 by 7-2/3 inches, cast iron, bevels up to 45 degrees
  • Laser: Class IIIA laser guide
  • Weight: 57 pounds
  • Warranty: two year warranty
  • ASIN: B09252SPKJ

SKIL DP9505-00 10-Inch 5-Speed Benchtop Drill Press

SKIL 6.2 Amp 10 In. 5-Speed Benchtop Drill Press with Laser Alignment and Work Light - DP9505-00

SKIL 6.2 Amp 10 In. 5-Speed Benchtop Drill Press with Laser Alignment and Work Light – DP9505-00

Check price on Amazon

The SKIL DP9505-00 is the clearest five speed press in this guide, with five named speeds that are easy to learn and repeat. Its 6.2 amp induction motor runs at 610, 950, 1500, 2050, and 2800 RPM. Use the slower settings for steel and large bits, the middle settings for general woodworking, and the faster settings for small bits in softwood and plastic. The ten inch swing matches the WEN 4212T, and the one half inch keyed chuck covers the same common range of bits. The table tilts from zero to forty five degrees to the left and right, and adjusts in height. A laser alignment system and an LED work light help with setup.

Specs

  • Swing: 10 inches
  • Motor: 6.2 amp induction motor, 120 volts
  • Speeds: 5 speeds, 610, 950, 1500, 2050, and 2800 RPM
  • Spindle travel: about 2 inches
  • Chuck: one half inch keyed chuck
  • Table: 7-5/8 by 6-1/2 inches, tilts 0 to 45 degrees left and right
  • Laser: Class II laser alignment system
  • Warranty: three year limited warranty
  • ASIN: B0BFQYZPQK

WEN 4214 12-Inch Variable Speed Drill Press

WEN 4214 12-Inch Variable Speed Drill Press

WEN 4214 12-Inch Variable Speed Drill Press

Check price on Amazon

The WEN 4214 gives the widest swing in this guide, at twelve inches, and it is the pick for cabinet sides, wide panels, and larger furniture parts. With a twelve inch swing, the bit can reach the center of a twelve inch wide board, which is useful for shelf pin holes, dowel joints, and hinge cups in door and cabinet work. The five amp induction motor runs with variable speed from 580 to 3200 RPM, and a digital readout shows the selected speed. Spindle travel is three and one eighth inches, the deepest travel among the benchtop models here, and it helps with thick legs, deep mortises, and drilling through thick stock in one pass. The worktable bevels up to forty five degrees and adjusts in height by rack and pinion. A table roller extension supports wider workpieces.

Specs

  • Swing: 12 inches
  • Motor: 5 amp induction motor, two thirds horsepower
  • Speeds: variable speed, 580 to 3200 RPM, with digital readout
  • Spindle travel: 3-1/8 inches
  • Chuck: five eighths inch keyed chuck with onboard key storage
  • Table: 9.5 by 9.5 inches, cast iron, bevels up to 45 degrees, with table roller extension and fence
  • Laser: Class IIIA laser guide
  • Weight: 85 pounds
  • Warranty: two year warranty
  • ASIN: B00HQONFY6

WEN DP1062V 10-Inch Variable Speed Benchtop Drill Press

The WEN DP1062V is a ten inch press with a stronger variable speed motor than the other ten inch models here, and it suits a shop that wants variable speed control without moving up to a twelve inch machine. Its 6.2 amp induction motor runs from 530 to 3100 RPM, with a digital speed readout, so the speed can be set for a large bit in hardwood, a twist bit in steel, or a small bit in plastic. Spindle travel is two inches, which covers most dowel, hinge, and shelf pin work, and the one half inch keyed chuck accepts the common range of woodworking bits. The worktable bevels from zero to forty five degrees to the left and right, and adjusts in height. An adjustable depth stop helps repeat the same depth across a set of parts.

Specs

  • Swing: 10 inches
  • Motor: 6.2 amp induction motor, 120 volts
  • Speeds: variable speed, 530 to 3100 RPM, with digital readout
  • Spindle travel: 2 inches
  • Chuck: one half inch keyed chuck with onboard key storage
  • Table: 8 by 7.5 inches, bevels 0 to 45 degrees left and right
  • Laser: Class IIIA laser guide
  • Weight: 65.9 pounds
  • Warranty: two year warranty
  • ASIN: B0DQ9BTQVR

Who should skip

A benchtop drill press is not the right tool for every shop. Skip this guide when most holes are drilled on site, in installed cabinets, or in workpieces that cannot be brought to a bench. A handheld drill, a right angle drill, or a portable drill guide fits that work better, because a benchtop press cannot be carried to the workpiece. Skip these models if the work is mainly heavy steel fabrication or production drilling in thick stock. These benchtop presses are built for wood, plastic, and light metal within their listed capacities.

FAQ

What size drill press is best for woodworking?

For most home woodworking, a ten inch or twelve inch benchtop press is a good starting point. Ten inches covers small boxes and furniture parts, while twelve inches adds room for cabinet sides and wide panels. An eight inch press is enough for small parts, but it limits the width of work that can be drilled to center.

How do I choose between variable speed and five speed?

Choose variable speed when the work moves often between wood, metal, and plastic, or between small bits and large Forstner bits, because the speed can be changed with a lever while the motor runs. Choose five speed when a simple belt system is enough and a clear set of named speeds is easier to repeat.

What does spindle travel mean, and how much do I need?

Spindle travel is how far the bit can move down in one pass without raising the table. Two inches covers most dowel holes, hinge cups, and shelf pin holes. Three inches or more helps with thick legs and deep mortises, so choose a longer travel when deep holes are a regular part of the work.

Do I need a laser guide on a drill press?

A laser guide is helpful, but it is not required. It projects a mark that helps align the bit with a layout line, which speeds up setup for repeated holes. It does not replace clamping the workpiece and checking the table for square. If the choice is between a laser and a larger swing or longer spindle travel, choose the size and travel first.

Final verdict

For most small shops, the WEN 4212T is the best starting point, because it combines a ten inch swing, variable speed from 530 to 3100 RPM, a laser guide, and a digital readout in a machine that still fits on a standard bench. Choose the WEN 4208T for the smallest bench and parts, the SKIL DP9505-00 for five clear speeds and a three year limited warranty, the WEN DP1062V for a stronger 6.2 amp variable speed motor, and the WEN 4214 for the widest swing and deepest spindle travel in this guide.

R
RP Woodworks Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Drill Presses for Woodworking and Small ShopsCheck price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.