What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Viking ranges sit at the premium end of the kitchen appliance market, and their owners know that when a component finally gives out, the replacement conversation can be frustrating. Knobs crack from heat exposure, igniters wear after thousands of sparks, and burner assemblies lose their finish. The real question is not whether you need a part but whether you are paying a fair price for one that actually fits and lasts.
The aftermarket world for Viking replacement parts is crowded with listings that look identical but differ in material quality, packaging quantity, and whether the seller confirms exact model compatibility. A bad purchase means a part that wobbles, melts, or simply does not seat correctly. This roundup compares published specifications, list prices, and verified owner feedback on the parts most commonly needed by Viking range owners in 2026, helping you find the best prices viking ranges parts without gambling on a listing.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Product prices and availability are accurate as of the date shown and are subject to change.
Quick Picks
| Product | Best for | Price |
|---|---|---|
| Suireh PA010034 Cooktop Burner Knob | Single-knob replacement | $26.99 |
| ZNTVW PA010034 5PCS Knob Set | Full burner knob refresh | $25.89 |
| Viking Range PA080037 Top Burner Front | Genuine OEM burner panel | $265.23 |
| SPOT REMOVER Pad for Aluminum Burner Ring | Cosmetic restoration | $16.99 |
| 2PCS Gas Range Burner Ignitors PB040264 | Top burner ignition fix | $13.99 |
| PB040001 Oven Igniter 2-Pack | Oven ignition repair | $29.99 |
| SUUJI PA010034 Knob Replacement | Lowest-cost single knob | $9.59 |
| Reyhoar PA010034 Black Knob | Model-specific fit confirmation | $24.94 |
How We Picked
We evaluated each part on four criteria: exact part-number compatibility with Viking model lines, build quality relative to price, whether the listing confirms cross-references (so you can verify against your own owner’s manual), and overall owner satisfaction based on published reviews. Price alone is misleading in this category—a $9 knob that melts within months costs more than a $27 knob that lasts years, so we weighted durability signals and buyer-reported fit accuracy alongside raw cost.
The 8 Best Prices Viking Ranges in 2026
Suireh PA010034 Cooktop Burner Knob for Viking Gas Range
This single-knob replacement targets owners who need exactly one burner control fixed and do not want to buy a multi-pack. The PA010034 designation matches Viking’s published part number for top burner knobs, making cross-reference verification straightforward.
- Pros: Heat-resistant plastic construction reported to hold up well near active burners; precise fit confirmed by multiple buyers with older Viking models.
- Cons: Sold individually, so replacing a full set requires multiple purchases at a higher combined cost than a bundled option.
Skip this one if your range needs three or more knobs replaced simultaneously—the per-unit cost makes bundle options more practical here.
ZNTVW PA010034 Top Burner Knob Replacements for Viking Gas Range 5PCS
A five-piece set addressing the common scenario where multiple knobs degrade around the same time. At this price for five units, the per-knob cost drops significantly compared to buying singles.
- Pros: Exceptional value per knob for full-range refreshes; consistent black finish across all five pieces keeps the cooktop looking uniform.
- Cons: Some owners note the plastic feels slightly lighter than OEM knobs, though fit and function remain unaffected in daily use.
Not ideal if you only need one knob—five spare parts sitting in a drawer add clutter without purpose.
Viking Range – PA080037 – TOP BURNER FRONT
The only genuine OEM part in this group, priced at a substantial premium. This front burner panel suits owners restoring a range after damage or renovation who want factory-exact materials and dimensions.
- Pros: Guaranteed dimensional accuracy and material match to your specific Viking model; no compatibility guessing required.
- Cons: The price is a multiple of aftermarket alternatives, which may not justify the cost for purely functional repairs.
Choose something aftermarket if budget matters or if the panel is cosmetically acceptable and only the knob or igniter needs attention.
SPOT REMOVER RESTORATION CLEANER PAD for Viking Stove Aluminum Burner Base Ring
This is a maintenance product, not a replacement part. It targets discoloration and heat staining on aluminum burner base rings that are structurally sound but visually tired.
- Pros: Extremely affordable way to restore appearance without replacing expensive metal components; simple one-step application.
- Cons: Does not repair physical dents, scratches, or warped metal—purely a cosmetic solution.
Move on if your burner ring is damaged rather than merely discolored.
2PCS Gas Range Burner Ignitors for Viking Range 9 12 15 K, Replace PB040264
A pair of top burner igniters covering the common failure mode where the spark electrode wears and ignition becomes unreliable. Two pack provides a spare or covers a dual-burner repair.
- Pros: Lowest ignition-repair cost per unit in this list; confirmed compatibility with the 9, 12, and 15 K model series via part number cross-reference.
- Cons: Only covers top burners—owners needing oven ignition repair must source a separate part.
Skip this if your oven igniter is the failing component rather than the cooktop.
PB040001 Gas Range Oven Igniter with 4 Ceramic Nuts, 2 Pack
An oven-specific igniter bundled with ceramic mounting hardware, addressing the issue where corroded or cracked nuts cause uneven mounting and premature failure.
- Pros: Included ceramic nuts solve a common secondary problem that often forces a second repair call; multiple cross-references (AP5315579, 065650-000, SGR4001, 792263) make verification easy.
- Cons: The two-pack price exceeds the top burner igniter option, though the added hardware justifies the gap for many buyers.
Not the right choice if your oven igniter is fine and the cooktop electrodes are what need replacing.
SUUJI PA010034 Top Burner Range Knob Replacement Part Compatible with Some Viking Stove Ranges
The absolute lowest-cost knob entry in this list, priced at a fraction of other options. It targets budget-conscious owners who need a functional replacement and accept modest material tradeoffs.
- Pros: Unbeatable per-unit price for a working knob; basic plastic construction is adequate for light-to-moderate use.
- Cons: The listing specifies compatibility with “some” Viking models, requiring extra verification against your specific range before ordering.
Pass if you need confirmed universal fit across a full Viking line or want premium material feel.
Reyhoar PA010034 Black Top Burner Range Knob Replacement for Viking Ranges
Stands out for listing specific model codes (VGIC305-4BSS, VGIC485-6GSS) alongside the PA010034 part number, reducing the guesswork that plagues cheaper alternatives.
- Pros: Model-level compatibility detail in the title itself saves research time; mid-range price balances cost with material quality.
- Cons: Priced above the SUUJI option despite serving a similar function, so the premium buys verification ease rather than a different material grade.
Consider the ZNTVW five-pack instead if you need multiple knobs and can confirm your model independently.
Buying Guide
Part Number vs. Model Number Verification
Viking ranges use both a model designation (like VGIC305-4BSS) and individual part numbers (like PA010034). A listing that includes your exact model code in its compatibility section is more reliable than one that only cites a part number. Cross-reference your owner’s manual or the sticker inside the oven door before ordering, and prioritize listings that echo both identifiers.
Material Tolerance Near Heat Sources
Knobs and igniters sit inches from open flame. Plastic knobs rated for higher thermal loads resist warping and discoloration over years of use. Ceramic nuts on igniters matter because metal hardware corrodes and seizes, making future removal impossible. Factor in what material the listing specifies rather than just the price per unit.
OEM vs. Aftermarket Fit Accuracy
Genuine Viking parts guarantee dimensional accuracy but carry a heavy premium. Quality aftermarket alternatives can match fit for knobs and igniters at a fraction of the cost, though structural panels and glass components are riskier to source from non-OEM suppliers. Reserve the OEM budget for complex assemblies and save on simpler rotational or consumable parts.
Our Verdict
The ZNTVW PA010034 5PCS set is the top pick for most owners because it solves the full-knob-refresh problem at the lowest per-unit cost with confirmed Viking compatibility. The SUUJI PA010034 wins as the budget pick when you need one working knob and your model verification confirms the listing. If you require guaranteed OEM fit for a structural burner panel, the PA080037 Top Burner Front is worth its premium—no aftermarket part should replace a load-bearing assembly panel.
FAQ
How do I confirm a knob fits my Viking range?
Locate the model sticker inside the oven door or on the back panel and match it against the compatibility list in the product title or description. If the listing only shows a part number without model codes, contact the seller before ordering to verify fit.
Can I replace a Viking igniter myself?
Yes—top burner igniters typically require removing one screw and reconnecting a wire terminal. Oven igniters involve a ceramic nut and may require a putty knife to release a sealed bracket. Both tasks need the range powered off and gas supply secured before starting.
Why do aftermarket knobs cost so much less than OEM?
Viking sells knobs as branded accessories through dealer networks that add margin. Aftermarket manufacturers produce identical-spec parts without the brand premium. The risk shifts to material quality and fit accuracy rather than function, so checking owner reviews for heat resistance and dimensional consistency is the key differentiator.
Is the spot remover pad safe on all Viking finishes?
The pad targets aluminum burner base rings specifically. Using it on stainless steel or glass surfaces can cause micro-scratching or clouding, so restrict it to the raw aluminum areas it was designed for and test on a hidden spot first.
0 Comments