The best benchtop HVLP spray finishing system for most small shops is a compact two-stage turbine system with a 1.3–1.5 mm needle, a 1-quart cup, and a separate turbine box that can sit under a bench; among established options, the Earlex 5500 is the strongest value for furniture parts, while Read more
Best Compact Lathe Dust Collection for Tight Workspaces The best compact lathe dust collection setup for a tight workspace is usually a high-airflow shop vacuum or compact dust extractor connected to an adjustable 2-1/2-inch hood positioned close to the cutting area; choose a small cyclone collector instead when you routinely Read more
The best lathe dust collection for beginners is usually a two-stage setup: a movable hood positioned close to the cutting action, connected to a dust extractor for small lathes or a 1.5–2 hp cyclone collector for regular bowl and spindle turning. Unlike a table saw, a wood lathe throws shavings Read more
The best wood lathe for a beginner is usually a variable-speed midi lathe with about 12–14 inches of swing, 18–24 inches of center distance, a #2 Morse taper, and enough stand stability to handle the projects you actually plan to turn—not necessarily the largest machine your budget allows. As an Read more
The best HVLP spray finishing system for beginners is the Fuji Semi-PRO 2 for frequent furniture projects, while the Earlex 5500 is the better value for occasional use and a compact handheld HVLP system makes sense only when storage space and budget matter most. As an Amazon Associate we earn Read more
The best budget HVLP spray finishing system for most furniture makers is a dedicated turbine system such as the Wagner FLEXiO 3500 or Fuji Semi-PRO 2; choose a compressor-powered HVLP gun instead when you already own a suitable compressor and need the lowest long-term equipment cost. A turbine is simpler Read more
Best Budget Lathe Dust Collection Systems for Small Shops The best budget lathe dust collection setup for a small shop is usually a 4-inch dust collector with a fine-filter upgrade for everyday turning, or a shop vacuum with a cyclone separator for occasional work on a compact lathe. The right Read more
Best wood lathe for turning large bowls: the short answer For most serious bowl turners, the best wood lathe for turning large bowls is a 20-inch-class machine with a heavy cast-iron bed, a powerful low-speed drive, and a sliding banjo that clears the intended blank. A 16-inch lathe can handle Read more
The best wood lathe tool sharpener for most turners is an 8-inch, low-speed grinder fitted with a quality aluminum-oxide wheel and a repeatable jig system; choose a Tormek wet grinder instead when maximum edge control and low heat matter more than speed. As an Amazon Associate we earn from qualifying Read more
Best Wood Lathe Tool Sharpening Systems for Repeatable Grinds The best wood lathe tool sharpening system for most turners is a slow-speed grinder paired with a compatible jig system, because the grinder controls heat while the jig helps reproduce a chosen bevel. Choose the Wolverine system if you want a Read more